$Micromechanical in-Situ Tensile Stress Tester Micromechanical Tensile and Compression Test, Fatigue Test, Torsion Test\Equipment$
$Micromechanical in-Situ Tensile Stress Tester Micromechanical Tensile and Compression Test, Fatigue Test, Torsion Test\Equipment$
$Micromechanical in-Situ Tensile Stress Tester Micromechanical Tensile and Compression Test, Fatigue Test, Torsion Test\Equipment$

$Micromechanical in-Situ Tensile Stress Tester Micromechanical Tensile and Compression Test, Fatigue Test, Torsion Test\Equipment$ $Micromechanical in-Situ Tensile Stress Tester Micromechanical Tensile and Compression Test, Fatigue Test, Torsion Test\Equipment$ $Micromechanical in-Situ Tensile Stress Tester Micromechanical Tensile and Compression Test, Fatigue Test, Torsion Test\Equipment$

Micromechanical in-Situ Tensile Stress Tester Micromechanical Tensile and Compression Test, Fatigue Test, Torsion Test\Equipment

Product Item：VYW

Maximum test force: 5-500N

Test force measurement range: 4% ~ 100% FS

Deformation measurement accuracy: better than ±2μm

Test force measurement accuracy: indicating value ± 1%

Description

In situ tester (micromechanical test + visual monitoring) : The mechanical properties of specimen materials are tested at micro and nano scales, and the microscopic deformation damage of materials is dynamically monitored by imaging equipment such as ordinary type microscope, metallographic microscope and ultra-depth microscope. The micromechanical behavior, damage mechanism and the correlation between load action and material properties of various materials and their products are deeply revealed. It can also be used independently to test the mechanical properties of materials.
Specification
1. Maximum test force: 5-500N
2. Test force measurement range: 4% ~ 100% FS
3. Test force measurement accuracy: indicating value ± 1%
4. Deformation measurement accuracy: better than ±2μm
5. Beam displacement resolution: 0.01μm
6. Beam test speed range: 0.01 ~ 3mm/min

7. Beam no-load adjustment speed: the maximum allowable test force below 3mm/min